PRODUCT CENTER

EPDM EPDM rubber gasket

EPDM rubber is a copolymer of ethylene, propylene and a small amount of non-conjugated diene. It only contains unsaturated double bonds in the side chain, so it has excellent aging resistance such as ozone resistance, heat resistance and weather resistance. , automotive seals and other fields.

Plate Heat Exchanger Gasket

The plate heat exchanger is a new type of high-efficiency heat exchanger made of a series of metal sheets with a certain corrugated shape. Thin rectangular channels are formed between various plates, and heat is exchanged through the plates. Plate heat exchanger is an ideal equipment for heat exchange of liquid-liquid, liquid-vapor. It has the characteristics of high heat exchange efficiency, small heat loss, compact and lightweight structure, small footprint, convenient installation and cleaning, wide application and long service life. Under the same pressure loss, the heat transfer coefficient is 3-5 times higher than that of the tubular heat exchanger, the floor area is one third of that of the tubular heat exchanger, and the heat recovery rate can be as high as 90% or more. There are three main types of plates: herringbone corrugated plate, horizontal straight corrugated plate and tumor-shaped plate.

EPDM

It has good weather resistance, odor resistance, water resistance and chemical resistance. It is suitable for alcohols and ketones, and can also be used for sealing in high temperature water vapor environment. It is suitable for sanitary equipment, automobile radiator and automobile braking system. Not suitable for food use or exposure to mineral oil. The general operating temperature range is -55℃~150℃.

Silicone O-ring

The volume of the O-ring being squeezed into the gap should be less than the maximum allowable value for the rubber ring to be squeezed into. For different kinds of fixed sealing or dynamic sealing applications, O-ring provides designers with an effective and economical sealing element. The o-ring is a double-acting sealing element. The initial compression in radial or axial aspects upon installation, imparts the initial sealing capability of the o-ring itself. The sealing force generated by the system pressure and the initial sealing force are combined into the total sealing force, which increases with the increase of the system pressure. O-rings play a prominent role in static sealing occasions. However, o-rings are also often used in dynamic appropriate applications, but are limited by the speed and pressure at the seal.

Covered O-ring

The volume of the O-ring being squeezed into the gap should be less than the maximum allowable value for the rubber ring to be squeezed into. For different kinds of fixed sealing or dynamic sealing applications, O-ring provides designers with an effective and economical sealing element. The o-ring is a double-acting sealing element. The initial compression in radial or axial aspects upon installation, imparts the initial sealing capability of the o-ring itself. The sealing force generated by the system pressure and the initial sealing force are combined into the total sealing force, which increases with the increase of the system pressure. O-rings play a prominent role in static sealing occasions. However, o-rings are also often used in dynamic appropriate applications, but are limited by the speed and pressure at the seal.

White Natural O-Ring

The O-ring is a circular rubber ring with a circular cross-section. It is mainly used for mechanical parts to prevent leakage of liquid and gaseous media under static conditions. In some cases, it can also be used for axial reciprocation and low-speed rotation. Moving dynamic sealing element. According to different conditions, different materials can be selected to suit it.

PTFE Teflon O-ring

O-rings are the most widely used seals in hydraulic and pneumatic transmission systems. Generally, O-rings are rarely used in rotary motion sealing devices. The O-ring is generally installed in the groove with a rectangular cross-section on the outer or inner circle to play a sealing role.

NBR nitrile rubber O-rings

Nitrile-butadiene rubber is a synthetic rubber suitable for good corrosion resistance to oils, solvents, aromatic hydrocarbons, basic hydrocarbons, oil and natural gas over a wide temperature range. Good corrosion resistance to hydroxides, salts and near neutral acids. However, in strong oxidizing media, chlorinated hydrocarbons, ketones and lipids, its corrosion resistance is poor, and the recommended working temperature is 51℃~121℃.

FKM Viton O-rings

Fluorine rubber compound is made by mixing binary and ternary fluorine raw rubber with compounding agent and vulcanizing agent. In addition to excellent heat resistance, medium resistance, and good physical and mechanical properties, it also has low compression set, good elasticity and long service life. Fluorine rubber has outstanding heat resistance (200 ~ 250 ℃), oil resistance, can be used to manufacture cylinder liner seals, rubber bowls and rotating lip seals, which can significantly improve the service time. Recommended working temperature -40℃~232℃.

Rubber miscellaneous parts

It has high and low temperature resistance, and maintains good flexibility in the temperature range of -70°C—+260°C. At the same time, it has various excellent properties such as waterproof, flame retardant, high temperature resistance, electrical conductivity, wear resistance, oil resistance, etc., in line with the EU environmental protection level. standard.

Pulse valve diaphragm

Its advantages are high reliability, good compounding, long working life and low cost. In low pressure operations, the force generated by the cloth-strengthened diaphragm may become superfluous.

Pneumatic Diaphragm

The working principle of the single-acting diaphragm type pneumatic cylinder: when the compressed air enters the rodless cavity from the air port on the cylinder head, the diaphragm is pushed, and the tray compresses the spring to make the piston rod move downward; When discharging, the spring releases energy to push the diaphragm, the tray and the piston rod to move upward. The working principle of the double-acting

Rubber elbow

Flexible rubber elbow, referred to as rubber elbow, is composed of fabric-reinforced rubber parts and flat unions, loose metal flanges or threaded pipe flanges. It is used for pipeline vibration isolation, noise reduction, and displacement compensation.

Rubber bumper

The cargo bed buffer pad is mainly installed on the edge of the loading and unloading platform, which is convenient for the buffer pad of the truck to stop, and plays the role of protecting the cargo bed and the truck from damage. Anti-collision rubber is one of the protective facilities that must be installed on the unloading platform.

Rubber filter plate

Diaphragm filter press rubber filter plate is based on the current situation of my country's filter press industry, developed a new overall structure of diaphragm type rubber filter plate, perfected the inner support skeleton structure of the filter plate, the production process of the filter plate and the rubber formula of the filter plate , so that the filter plate has the advantages of high strength, high tear, medium resistance, high and low temperature resistance, lightness and durability.

Pneumatic Union

It is widely used in pipelines with low pressure, large diameter, large dislocation and frequent loading and unloading, especially for the connection between mud tanks of solid control systems in the petroleum industry. The connecting pipeline can be made of glass steel pipe or rubber hose with joints at both ends. The glass steel pipe is corrosion-resistant, easy to handle, and the rubber pipe can be bent, which is suitable for dislocation installation of pipelines on site.

Metal lagging

In recent years, coated metal has become a new application or potential application field of TPE/TPR and TPU. A layer of soft rubber material is coated on the metal surface, which can play the role of anti-skid, shock absorption, anti-corrosion and so on. TPE/ TPR, TPU applied to coated metal

Plum cushion

Plum-shaped elastic coupling buffer. It is used to buffer the shaft of the coupling of various heavy machinery equipment. In some areas it is also known as the Plum Blossom Plate. According to the material, it can be divided into polyurethane plum cushion, rubber plum cushion, nylon plum cushion

Pinch Valve Inner Bushing

The higher the quality of the pinch valve inner liner, the longer the service life of the pinch valve and inner liner. The long service life of the pinch valve inner bushing means low maintenance costs for the equipment. The replacement of the pinch valve inner liner is very simple and can be carried out at the user's job site with the help of detailed installation instructions, thus requiring only a short downtime.

Protector Capsule

Hydrogenated nitrile rubber protector capsule deep well submersible electric pump protector capsule capsule type seal protector, protector refers to a device that provides electrical safety protection for electrical appliances. It has a built-in intelligent anti-high voltage device. Under abnormal circumstances, the internal protection device will be activated intelligently to ensure the safety of electricity consumption of the back-end electrical appliances.